|
|
|
|
1. Aso series brackets .
Aso Series Brackets offer an optimal rhomboid-shape design with a fully contoured mesh-base at an exceptional price.
Made of 75 gauge mesh of the 316-L stainless steel, the mesh-bases of Aso Series Brackets are perfectly designed with CAD technique to achieve a fully combined contour at both of the mesial-distal & gingival-occlusal direction according to the corresponding tooth surface, thereby eliminates the rocking and provide an accurate adoption to the bonding tooth surface, and achieve the excellent Retention afterward.
More Features:
 |
Super welding technique to eliminate the separation concern between mesh-base and bracket itself. |
| |
|
Built-in torques and angulations for accurate treating force transaction. |
|
Small and Strong hooks on cuspids or/and bicuspids upon preferring |
|
Smooth and round edge, as well as the beveled lower incisors and bicuspids for maximum patient comfort and avoid the occlusal interference. |
| |
|
Vertical scribe line paralleling to the long axis of the clinic crown and the rhomboidal shape design help for easy & accurate positioning. |
| |
|
Different permanent color codes for the easy disto-gingival identification of each quadrant. |
| |
|
Aso Series Brackets are available for both St Edgewise prescription and Preadjusted (Roth / MBT) prescription £¬ and each of them are available for Full Size and Mini Size with .018 and .022 slot systems.
|
|
|
| |
2. Thino Series Brackets
Upon the design of the Aso Brackets, Thino Series Bracket improved its performance in correspondence of clinic requirements. Made of much strong stainless steel, this bracket series are in a very low labial-lingual profile ( L.P ) design , which is dramatically reduced the interference of occlusion and clinical bonding failure afterwards, so maximize patient comfort without sacrificing the structure strength at the wings, slot, etc of the bracket.
More Features:
|
Even though with the L.P design, Thino series bracket is stronger to resist various deforming forces during the treatment. |
| |
|
The Fully combined Contour of the Mesh Bases are well match corresponding tooth surface to achieve the excellent bonding strength. |
| |
|
The improved tie wing undercuts are easy for the ligation even with a reduced thickness of brackets. |
| |
|
Vertical scribe line, rhomboidal shape, and the different permanent color codes for each quadrant make the clinic practicing easy. |
| |
Thino Series Bracket is available for the preadjusted appliance of Roth and MBT in both .018 / . 022 slot systems
Thino Series Bracket is available with the both of the Mini size and Full size.
|
|
| 3. Meili Series Brackets . |
Using the advanced Metal Injection Module (MIM) manufacturing technique, Meili series brackets are developed with an excellent surface polishing and dramatically reduced friction in slot.
|
More Features:
|
The stronger bracket structure combined with a well-contoured mesh base. |
|
The tie wings are extended slightly toward the tooth surface , which avoid the possible irritation to the patients' buccal mucosa. And the ample undercuts under the tie wings make it easy to hold the ligatures. |
| |
|
The enhanced permanent colour codes are dotted clearly at the shallow spots of the distal-gingival wings. |
| |
| |
Meili Series Brackets are available for both Roth and Standard Edgewise prescription
|
Meili Series Brackets are only available for 0.022 slot right now.
|
|
| 4. Other Brackets |
.1) Begg Brackets
The Begg bracket version with a flat mesh-base is for incisors; and that with a curved mesh-base is for cuspids or bicuspids with a good combined contour.
Description |
Part No |
The Flat for incisors and laterial incisors |
1040-001/2 |
The Contoured for cuspids and bicuspids |
1040- 003/4/5 |
.2) Tip-Edge Brackets
Description |
Part No |
One-case-kit of upper/lower 5---5 |
1050-55 |
One-case-kit of upper/lower 6---6 |
1050-66 |
.3) Brackets with the vertical slot
 |
0.020 x 0.020 vertical slot accommodates virtually all auxiliaries. |
|
Permanent ID mark is color-enhanced for easy identification. |
Description |
Part No |
.018 Roth w/hs at #3 only, One-case-kit 5---5 |
1115-55-3H |
.022 Roth w/hs at #3 only, One-case-kit, 5--5 |
1116-55-3H |
.018 St Edgewise, One-case-kit 5---5 |
1125-55-3H |
.022 St Edgewise, One-case-kit 5---5 |
1126-55-3H |
.4) Weldable Brackets
Description |
Part No |
.018 St Edgewise bracket, bicuspids w/o hooks |
1922-004/5 |
.022 St Edgewise bracket, bicuspids w/o hooks |
1924-004/5 |
.018 St Edgewise bracket, 1 st Molar, w/o hooks |
1922-006 |
.022 St Edgewise bracket, 1 st Molar, w/o hooks |
1924-006 |
.018 St Edgewise bracket, 1 st Molar, w/hooks |
1922-006H |
.022 St Edgewise bracket, 1 st Molar, w/hooks |
1924-006H |
.5) Bondable Molar Brackets
Description |
Part No |
.018 St Edgewise bracket, 1 st Molar, w/o hooks |
1022-006 |
.022 St Edgewise bracket, 1 st Molar, w/o hooks |
1024-006 |
.018 St Edgewise bracket, 1 st Molar,UL/LR, w/hooks |
1022-076H |
.022 St Edgewise bracket, 1 st Molar,UL/LR, w/hooks |
1024-076H |
.018 St Edgewise bracket, 1 st Molar,UR/LL, w/hooks |
1022-086H |
.022 St Edgewise bracket, 1 st Molar,UR/LL, w/hooks |
1024-086H |
|
| 5. The Bracket Trays |
1) Rectangular plastic one case kit tray
|
Volume: 115 x 45 x 9.5 mm |
|
Weight : 22g |
|
For 7¡ª7 case-kit |
Description |
Part No |
Clear cover, blue bottom of the box with blue velvet liner |
170B-77 |
Clear cover, black bottom of the box with gray velvet liner |
170G -77 |
2) Round Plastic one-case-kit tray
|
Volume: 140x103x 10mm |
|
Weight: 15.5g |
|
For 5-5 case-kit |
|
Clear cover and white bottom |
|
Blank label in the center of the tray with white/yellow/blue colors and
bracket identification |
| |
3) Round Plastic 10~30 cases tray
|
Volume: 138x138x 10mm |
|
Weight: 20g |
|
For 6-6 case-kit |
|
Clear cover and white bottom |
|
Blank label with blue color and easy bracket identification in the center of
the tray |
| |
|
| |
|
